Server.factoryblinkup ethernet only parameters

BlinkUp
1

With the impFactory, we don’t have Wifi available so what do I put as the SSID and password parameters for server.factoryblinkup(SSID, password, pin, flags).

Thanks.

2

Passing “” (a zero character string) works.

3

Just bear in mind that the values of ssid and password are what get transmitted to the Device-Under-Test, so they have no effect on the BlinkUp fixture, eg. an impFactory.

This may not be what you mean, of course, but I wanted to make sure, just in case, since you mention the impFactory specifically.