Lots of device connected

General
1

Suddenly I am getting a lot of device connected messages…

2015-07-08 12:51:38 UTC+2 [Status] Device connected 2015-07-08 12:51:48 UTC+2 [Status] Device connected 2015-07-08 12:52:58 UTC+2 [Status] Device connected 2015-07-08 12:53:08 UTC+2 [Status] Device connected 2015-07-08 12:53:19 UTC+2 [Status] Device connected 2015-07-08 12:53:29 UTC+2 [Status] Device connected 2015-07-08 12:53:39 UTC+2 [Status] Device connected 2015-07-08 12:53:49 UTC+2 [Status] Device connected 2015-07-08 12:54:59 UTC+2 [Status] Device connected 2015-07-08 12:55:09 UTC+2 [Status] Device connected 2015-07-08 12:55:19 UTC+2 [Status] Device connected 2015-07-08 12:55:29 UTC+2 [Status] Device connected 2015-07-08 12:55:39 UTC+2 [Status] Device connected 2015-07-08 12:55:49 UTC+2 [Status] Device connected 2015-07-08 12:55:59 UTC+2 [Status] Device connected 2015-07-08 12:56:09 UTC+2 [Status] Device connected 2015-07-08 12:56:19 UTC+2 [Status] Device connected 2015-07-08 12:56:29 UTC+2 [Status] Device connected 2015-07-08 12:56:39 UTC+2 [Status] Device connected 2015-07-08 12:56:52 UTC+2 [Status] Device connected 2015-07-08 12:57:01 UTC+2 [Status] Device connected 2015-07-08 12:57:09 UTC+2 [Status] Device connected 2015-07-08 12:57:19 UTC+2 [Status] Device connected 2015-07-08 12:57:31 UTC+2 [Status] Device connected 2015-07-08 12:57:40 UTC+2 [Status] Device connected 2015-07-08 12:57:50 UTC+2 [Status] Device connected 2015-07-08 12:58:00 UTC+2 [Status] Device connected 2015-07-08 12:58:10 UTC+2 [Status] Device connected

and it just continues on… I haven’t changed anything on this device for quite a while, and its been working fine until now, is something up, or is my imp dying? D:

2

Interesting that they’re all exactly ten seconds apart.

3

Yes, not sure why, they stopped on their own again too…

4

Got a device ID?

5

234f8f6938a609ee

6

Were you using setpermanentvalues/server.save from the device? It looks like you were - there were some issues with that this morning; it’s a deprecated function too, so ideally remove it and replace it with a server.save() on the agent side.

7

I am using server.save(rainTable); but only in the agent, the device is only doing readings and sending them to the agent as they come in.

8

That’s… strange. I’m likely misreading the logs, I’ll check with someone who knows better than me :slight_smile:

9

The feedback from people who know said this was the agent-side issue with server.save() that was causing sporadic issues over the weekend for some agents.

The fix was deployed essentially just as your problems stopped.