I am regularly seeing long delays and retries in downloading firmware.Checking on the ADSL line and router throughput cannot see anything wrong on the line (no errors of any type) and the router shows the line as being below 10-15% utilization.
Often this happens shortly after the “debugging hippos” message has flashed on my screen forcing me to (re)Build & Run
Any way I can check when this happens on the status of the Imp cloud & compile servers?
2014-03-10 13:19:58 UTC+2: [Status] Downloading new code; 54.59% program storage used 2014-03-10 13:20:23 UTC+2: [Status] Device disconnected; 1608 bytes sent, 541 received, 2149 total 2014-03-10 13:20:31 UTC+2: [Status] Downloading new code; 54.59% program storage used 2014-03-10 13:20:56 UTC+2: [Status] Device disconnected; 0 bytes sent, 0 received, 0 total 2014-03-10 13:21:09 UTC+2: [Status] Downloading new code; 54.59% program storage used 2014-03-10 13:21:34 UTC+2: [Status] Device disconnected; 0 bytes sent, 0 received, 0 total 2014-03-10 13:21:44 UTC+2: [Status] Downloading new code; 54.59% program storage used 2014-03-10 13:22:09 UTC+2: [Status] Device disconnected; 0 bytes sent, 0 received, 0 total 2014-03-10 13:22:26 UTC+2: [Status] Downloading new code; 54.59% program storage used 2014-03-10 13:22:48 UTC+2: [Agent]